|Minimum Age Recommendation: 14 years
Experience Level: Beginners ~ Expert
Recommended Environment: Outdoor
Assembly Time: Less than half hour
Is Assembly Required: Yes
|Motor: 3715 powerful out runner brushless motor
ESC:Easy-Plug 40A Switch-mode BEC brushless ESC
Servo: 9-gram Servo * 6pcs
Propeller: 1060 Propeller
|2.4Ghz 6-Channels(Not Included)
Receiver Not Included
|11.1V/14.8V 1800mAh ~ 10000mAh Li-Po (Not Included)|
|Wingspan: 1980mm (77.9 in)
Overall Length: 1170mm (46 in)
Flying Weight(without battery): 1500g
- Add plastic hinge on the vertical and horizontal tails,increase the rudder angle.
- Big space, durable UNIBODY design
- Special airfoil design for carrying big weight
- Compatible with most kind of camera mounting
- Capability to carry Camera Gimbal
- Quick, easy to assembly, no glow required
- Light weight and durable EPO wing construction
FPV SYSTEM DEPLOYMENT
Special design and optimize for long range FPV, so there is a lot of space for mounting systems and different Camera mounting way, which not require any modify.
EASY FOR ALL KIND OF CAMERA MOUNTING
Are you tired of modification a lot to mount your camera well? Now you don’t have to. We consider a lot kind of mounting for you, you can easy to mount it as better as you like. Stable, safe, and easy, just focus to make a wonderful video and enjoy it.
EASY FOR FPV CAMERA MOUNTING
Considering for professional FPV traveling, usually you will need a full HD camera and another FPV camera for Video transmission, so we leave a very convenient, safe, good view space for you to mount a FPV camera, just enjoy it.
SPECIAL FUSELAGE DESIGN
The whole unibody fuselage is produced by our copyright one-step moulding technology, which make it more durable and strong than other EPO foamy insert carbon tube. So it can avoid the tail effected by the air and cause the bump during the flight.
Special small platform in the tail is builded for video TX installation, can leave away from the radio equipment avoid causing nosy. In the same time the propeller can cool down it from over heat.
We are thinking much more than others, for UAV system setup, to calibrate the sensors in horizontal level is very very importance. So the gradienter in the wing CG position will help a lot to setup the system.
VERY BIG SPACE FOR BIG BATTERIES
The very importance point for a airplane which can travel long range or not, should be the big batteries carrying ability. Thanks to our unibody technology, we have much more a lot space than other foamy plane to carry almost twice capacity batteries. Of course we still have a lot more space for equipment, and sure we have lot more space for cooling down the battery.
As image showing the fuselage carrying 2pcs 14.8V 5000mAh Li-Po batteries.
1 x Volantex Ranger EX 757-3 RC Airplane PNP
Brand Name: XK
Item NO.: A-600
Item Name: 3D6G system highly simulated airplane
Product Size: 580mm (Wingspan) * 534mm (Length)
Flying Weight: 90g
Motor: High performance 1404 brushless motor
Battery: 7.4V 300mAh 25C li-po battery
Flying time: 10 minutes
Charger Time: 30-60min
Control Distance: 300m
With 2.4GHz comminication technology,can be compatible with FUTABA S-FHSS
3D 6G mode makes flight more stable,easy for beginner
3-6-axis-gyro mode switching,3-axis gyro lock mode, increased stance stability.
6-axis model increases stability,under any circumstances as long as the release lever, the aircraft will maintain stable flight attitude.
Mini appearance,reasonable architectural design
High efficient brushless motor provides more dynamic flight.
Detachable wing structure with reinforced carbon Rod,easy to carry
Small and big rudder setting,easy to roll,spiral and do other actions
Equipped with high discharge rate battery,powered flight time is about 10min,normal flight time is more than 15 min.
Li Polymer special balance charger and adapter.
1x XK A600 RC airplane
1x Spare blade
1x USB charging cable
Gyro: 6 axis
Camera: 2MP(Photo 1280*720p, video 1600*1200p)
Flight Duration: 9 Minutes
Remote Control Distance: 150 meters
Recharging Time: 150mins
Battery For Quadcopter: 7.4V 1500mAh 20C (included)
Battery For Transmiter: 4 x AA Battery (not included)
Product size:40 x 40 x 17cm
Color box size:59.5 x 7 x 34.2 cm
Function:ascend/descend/forward/backward/side flying/360°rolling action/hover/3D/LED/camera/CF mode/One key return
One Aixs gimbal and 2.0MP HD camera can help you take high quality pictures.
With Headless Mode/ no need to adjust the position of aircraft before flying
One key to return function makes it easily to find the way home
Transmitter has 4 mode, can exchange freely
Support camera/ missile launcher,water connon/ hook&basket and bubble blower
With the fixed-height mode,can stand in a high pressure
Suspension components can effectively reduce body vibration on the camera
Plug-in battery, with dual protection
With 2.4G Transmiter/ Easy Adjust Frequency
Full Scale Remote Control with built-in 6 axis gyro system
With LED light, possible for night fly
2.0MP HD camera
1 x Quadcopter
1 x Transmitter
1 x Battery
1 x Charger
4 x Blades
1 x Camera
4 x Protect Covers
2 x Landing Gears
1 x Screwdriver
1 x USB Cable
1 x 4GB SD Card
1 x Reader
1 x English Manual