Menu


My Cart | Checkout | Contact Us
 
 
← Go Back

Unique Models LTV XC-142 Tilt-wing Experimental RC Aircraft Airplane PNP

Unique Models LTV XC-142 Tilt-wing Experimental RC Aircraft Airplane PNP
Unique Models LTV XC-142 Tilt-wing Experimental RC Aircraft Airplane PNP

Price: $366.29

Buy Now Add to Cart

The Ling-Temco-Vought (LTV) XC-142 is a tiltwing experimental aircraft designed to investigate the operational suitability of vertical/short takeoff and landing transports. An XC-142A first flew conventionally on 29 September 1964, and on 11 January 1965, it completed its first transitional flight by taking off vertically, changing to forward flight and finally landing vertically. Its participants pulled out of the program one-by-one and it eventually ended due to a lack of interest after demonstrating its capabilities successfully.

Description:
Brand:Unique Models
Item
:LTV XC-142 Til-twing Experimental RC Aircraft 
Wingspan:1200mm / 47.24inch
Length:1000mm / 39.37inch
Hight:430mm/ 16.93inch
Take-off Weight:2,400g
Weight of Plane:2,000g
Power System: 5x Brushless 2212-550kv
Propeller:1045CW*2, 1045CCW*2, 8060 at the tail *1
Electronic Speed Control:5*30A ESC
UBEC:3A*1
Servos:9g x 4, 16g x 1
Battery:6s/2600mAH 35C(not included)
Radio System:2.4GHz 6CH(not included)
PNP:Plug N Play, requires Radio System, Battery and Charger


Features:
The flying characteristics of the original are reproduced in the model by the pre-installed flight controller. Transition from vertical to horizontal flight and back, motor control and stabilization are managed by the flight controller so that a single switch can be used for this function. True to scale, pitch control is assisted by a horizontally mounted propeller at the tail, which is also managed by the flight controller.

Package Included:
1 x Unique Models LTV XC-142 Til-twing Experimental RC Aircraft PNP
5 x Motor:2212 550KV
5 x Propeller
5 x Servo
5 x ESC
1 x UBEC




Others Also Viewed these Popular Items...View All Products

New Version Volantex Ranger EX 757-3 1980mm Wingspan Long Range FPV RC Airplane PNP

New Version Volantex Ranger EX 757-3 1980mm Wingspan Long Range FPV RC Airplane PNP
Description:
The Ranger EX is a airplane is specially designed for Long Range FPV and quick and very easy trouble free Setup of this great big Bird. FPV Ranger EX offers few greater qualities that every FPV pilot looks forward to have in his / her RC FPV Plane.

- It has bigger tougher PVC Fuselage that makes this plane a crash resistant plane, Tons of open space to let bigger hands do their job inside the fuselage when it comes to mount the electronics inside and also this big place makes it possible for one to mount more gear inside and keep things neat.
- Ability to carry more payload means one can mount higher mAh batteries to get ultra long flight times needed for those long range FPV flights you are going to do
- Tall Landing gear and dragger wheel means you can now safely take off and land from ground. No need to hand launch a big heavy plane with all the gears and dangerous and sharp propeller spinning at the back
- Easy mounting of Various Brushless gimbals for GoPro 3 under the nose, now you can take ultimate stable flight videos of your long range flights
- Super easy few step setup and glue free assemble.
- Two pieces to carry only, Fuselage and Wings detach quick and easy for easy transportation and storage. Quick attachment on field for flight
- And not to forget the super awesome and powerful flight performance with long flight endurance this plane offers.


Specification:
Minimum Age Recommendation: 14 years
Experience Level: Beginners ~ Expert
Recommended Environment: Outdoor
Assembly Time: Less than half hour
Is Assembly Required: Yes
Motor: 3715 powerful out runner brushless motor
ESC:Easy-Plug 40A Switch-mode BEC brushless ESC
Servo: 9-gram Servo * 6pcs
Propeller: 1060 Propeller
2.4Ghz 6-Channels(Not Included)
Receiver Not Included
11.1V/14.8V 1800mAh ~ 10000mAh Li-Po (Not Included)
Wingspan: 1980mm (77.9 in)
Overall Length: 1170mm (46 in)
Flying Weight(without battery): 1500g
Flaps: Yes
Retracts: No
19*24.5*106 cm


Key Features:
Add plastic hinge on the vertical and horizontal tails,increase the rudder angle.
- Big space, durable UNIBODY design
- Special airfoil design for carrying big weight
- Compatible with most kind of camera mounting
- Capability to carry Camera Gimbal
- Quick, easy to assembly, no glow required
- Light weight and durable EPO wing construction


FPV SYSTEM DEPLOYMENT
Special design and optimize for long range FPV, so there is a lot of space for mounting systems and different Camera mounting way, which not require any modify. 


EASY FOR ALL KIND OF CAMERA MOUNTING
Are you tired of modification a lot to mount your camera well? Now you don’t have to. We consider a lot kind of mounting for you, you can easy to mount it as better as you like. Stable, safe, and easy, just focus to make a wonderful video and enjoy it.


EASY FOR FPV CAMERA MOUNTING
Considering for professional FPV traveling, usually you will need a full HD camera and another FPV camera for Video transmission, so we leave a very convenient, safe, good view space for you to mount a FPV camera, just enjoy it.


SPECIAL FUSELAGE DESIGN
The whole unibody fuselage is produced  by our copyright one-step moulding technology, which make it more durable and strong than other EPO foamy insert carbon tube. So it can avoid the tail effected by the air and cause the bump during the flight.
Special small platform in the tail is builded for video TX installation, can leave away from the radio equipment avoid causing nosy. In the same time the propeller can cool down it from over heat.


GRADIENTER PREINSTALLED
We are thinking much more than others, for UAV system setup, to calibrate the sensors in horizontal level is very very importance. So the gradienter in the wing CG position will help a lot to setup the system.


VERY BIG SPACE FOR BIG BATTERIES
The very importance point for a airplane which can travel long range or not, should be the big batteries carrying ability. Thanks to our unibody technology,  we have much more a lot space than other foamy plane to carry almost twice capacity batteries. Of course we still have a lot more space for equipment, and sure we have lot more space for cooling down the battery.
As image showing the fuselage carrying 2pcs 14.8V 5000mAh Li-Po batteries.

Package Included:
1 x Volantex Ranger EX 757-3 RC Airplane PNP

Read More


Price: $197.99

Buy Now Add to Cart

Cheerson CX-10A CX10A Headless Mode 2.4G 4CH 6 Axis RC Quadcopter RTF

Cheerson CX-10A CX10A Headless Mode 2.4G 4CH 6 Axis RC Quadcopter RTF

Description:
Item name: Cheerson CX-10A Headless Mode RC Quadcopter
Frequency: 2.4G    
Gyro: 6 axis
Product size: 40*40*22mm
Quadcopter weight: about 12g
Diameter of blade: 30mm
Product battery: 3.7V 100MAH
Remote battery: 2XAAA dry battery
Charging time: 30mins
Flying time: about 5mins
R/C distance: about 20m             
Flying distance: about 20m            
Color: black,white,silver,golden
Certificates: CE,ROHS,EN71, EN62115,R&TTE,ASTM,HR4040

Features:    
With Headless Mode,no need to adjust the position of aircraft before flying        
4 Channel which can do ascend, descend, forward, backward, left sideward fly, right sideward fly and throw to fly             
It has 6-axis gyro which can have more stable flying and be easy to control             
It has 3 speeds with high, middle and low. It can be self-adjusting which is easier for new players to handle.             
Left rotation, right rotation, hover                         
It can realize 3D tumbling in four directions with 4 LED lights.             
Battery protection             

Package Included:
1 x Cheerson CX-10A RC Quadcopter
1 x 2.4G transmitter
1 x USB cable
2 x Blades
1 x Manual

Read More


Price: $18.25

Buy Now Add to Cart

JJRC X1 With Brushless Motor 2.4G 4CH 6-Axis RC Quadcopter RTF

JJRC X1 With Brushless Motor 2.4G 4CH 6-Axis RC Quadcopter RTF

Description:
Brand Name: JJRC
Item NO.: X1
Item name: RC Quadcopter
Frequency: 2.4G
Gyro: 6 axis
Material: ABS
Size: 21*21*11cm
Color: Green, Blue
Motor: D1806-2280KV brushless motor
Flight time: about 15 minutes
Charging time: 90 minutes
Control distance: about 300-400M
Battery for quadcopter: 7.4V 1300mah Li Battery (included)
Battery for transmitter: 4 x 1.5V AA battery (not included)
Suitable FPV:Syma X5C-1 X5SC 5.8G FPV 720P Camera with Monitor

 


Features:
With brushless motor, the D1806 - 2280KV provides strong power to the quadcopter.
Large 7.4V 1300mA capacity battery ensures the strong power, Superior 15mins long flight time.
It has 6-axis gyro which can have more stable flying and be easy to control.
4 Channel which can do ascend, descend, forward, backward, left sideward fly, right sideward fly.
With highlight LED lights, make it more dazzle beautiful and colorful night light.
Idle speed adjustment / stop expansion, rudder volume switch
Lightweight airframe with nice durability
Function: Up/down/left/right/side flight/ fine-tuning/aileron elevator/ rudder 3 rate switch/aileron trim/idle trim and stop/360 rollover.

Package Included:
1 x JJRC X1 RC Quadcopter
1 x Transmitter
1 x Battery
1 x Charger
4 x spare blades
4 x protection cover
2 x Landing gear
1 x Manual

Read More


Price: $109.98

Buy Now Add to Cart

Yi Zhan YiZhan X4 6 Axis 2.4G RC Quacopter With LCD Transmitter RTF

Yi Zhan YiZhan X4 6 Axis 2.4G RC Quacopter With LCD Transmitter RTF

Description:
Brand Name: Yi Zhan
Item Name:2.4G  6Axis Quadcopter
Item NO.:X4

Color Gold&Black,White&Black
Material Plastic,Metal electronic components
Frequency 2.4G
Channel 6CH
Control Distance About 100m
Playing Time About 6 min
Charging Time About 60 min
Read More


Price: $26.95

Buy Now Add to Cart